| Quantity: | |
|---|---|
Visbella® Bike Chain Lube is made of special formula, ideal for any chain - driven tools or vehicle such as motorcycles, mopeds, chainsaws, lawnmowers and bicycles. It provides protection against corrosion and rust as well as cleaning away debris. It penetrates, lubricates and release everything while removing moisture from surfaces.
Features | Benefits |
Cleans, lubricates and protects | Superior anti-wear and penetration |
Directions
1. Before use, clean chain to remove dirt, oil and grime.
2. Shake can thoroughly before use.
Note: For best results, aerosol can should be at room temperature before spraying.
3. Using the spray extension tube provided, apply to full length of the inside of the chain, allowing the Chain Lube to run vertically down into chain parts.
4. Leave to dry.
Storage
Optimal Storage: Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C to 28°C (46°F to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
Keep away from the heat and fire.
Note
Swallowed ： Give water (If conscious）. Seek medical advice. DO NOT give milk and oil. DOT NOT give alcohol.
Skin: Remove contaminated clothing, including footwear. Wash with water and soap.
Eyes: Wash with running water.
Inhalation: Fresh air , rest, keep warm. If breathing shallow, give oxygen and medical attention.
KEEP OUT OF REACH OF CHILDREN.
Visbella® Bike Chain Lube is made of special formula, ideal for any chain - driven tools or vehicle such as motorcycles, mopeds, chainsaws, lawnmowers and bicycles. It provides protection against corrosion and rust as well as cleaning away debris. It penetrates, lubricates and release everything while removing moisture from surfaces.
Features | Benefits |
Cleans, lubricates and protects | Superior anti-wear and penetration |
Directions
1. Before use, clean chain to remove dirt, oil and grime.
2. Shake can thoroughly before use.
Note: For best results, aerosol can should be at room temperature before spraying.
3. Using the spray extension tube provided, apply to full length of the inside of the chain, allowing the Chain Lube to run vertically down into chain parts.
4. Leave to dry.
Storage
Optimal Storage: Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C to 28°C (46°F to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
Keep away from the heat and fire.
Note
Swallowed ： Give water (If conscious）. Seek medical advice. DO NOT give milk and oil. DOT NOT give alcohol.
Skin: Remove contaminated clothing, including footwear. Wash with water and soap.
Eyes: Wash with running water.
Inhalation: Fresh air , rest, keep warm. If breathing shallow, give oxygen and medical attention.
KEEP OUT OF REACH OF CHILDREN.
