| Quantity: | |
|---|---|
Visbella® Gasket Cleaner is a powerful remover formulated to quickly and easily remove remains of seals and gaskets - it acts by softening the materials making it easy to scrape offff. It can also be used to remove industrial coatings (paints and varnishes), adhesives, carbon deposits, baked on oil and grease from metal surfaces. This product can be used to eliminate the need for excessive scraping or sanding. It is particularly suitable for removing coatings from aluminum and other soft metals where excessive scraping could damage the surface. The gel-like consistency, when applied, ensures it remains in the desired location, allowing it to work more effffectively.
Warning:
AVOID INHALING ! If skin contact, wash with plenty of water and soap. Highly flammable product. Keep it away of ignition sources. Do not store the product in warm close areas because the accumulation of vapors can cause an explosion and make people unconscious.
Dispose the container separately, let's not pollute our environment.
KEEP OUR OF REACH OF CHILDREN !
1.Before use, turn off or disconnect the equipment.
2.Shake can thoroughly before use.
Note: For best results, aerosol can should be at room temperature before spraying.
3.Using the spray extension tube provided, apply to the surface.
4.Leave to dry.
If it is very dirty, remove the dirt with a soft bristle brush. If there is any condensation after applying the product, clean with a towel or flannel.
Visbella® Gasket Cleaner is a powerful remover formulated to quickly and easily remove remains of seals and gaskets - it acts by softening the materials making it easy to scrape offff. It can also be used to remove industrial coatings (paints and varnishes), adhesives, carbon deposits, baked on oil and grease from metal surfaces. This product can be used to eliminate the need for excessive scraping or sanding. It is particularly suitable for removing coatings from aluminum and other soft metals where excessive scraping could damage the surface. The gel-like consistency, when applied, ensures it remains in the desired location, allowing it to work more effffectively.
Warning:
AVOID INHALING ! If skin contact, wash with plenty of water and soap. Highly flammable product. Keep it away of ignition sources. Do not store the product in warm close areas because the accumulation of vapors can cause an explosion and make people unconscious.
Dispose the container separately, let's not pollute our environment.
KEEP OUR OF REACH OF CHILDREN !
1.Before use, turn off or disconnect the equipment.
2.Shake can thoroughly before use.
Note: For best results, aerosol can should be at room temperature before spraying.
3.Using the spray extension tube provided, apply to the surface.
4.Leave to dry.
If it is very dirty, remove the dirt with a soft bristle brush. If there is any condensation after applying the product, clean with a towel or flannel.
