| Quantity: | |
|---|---|
Visbella® Heavy-duty Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. This coating provides one-coat build-up with no dripping, running or sagging. The undercoating is excellent for automotive undercarriages and for other uses including protection for wheel wells, fenders, quarter.
Features | Benefits |
Rust disappears | Offers lasting and flexible |
Excellent protective primer | With a roar-preventing effect. |
Durable black polymer coating | Applied in various kinds of metal surface |
Directions
1.Clean the base area thoroughly，which should be clean dry and free of dust，oil， grease and wax，etc. 2.Cover the other parts tightly；
3.Spend two minutes to shake the can evenly，open the lid，remover the seal and insert the special designed spray gun onto the mouth，collect the 0.6-0.8M compressed air， finally spray onto the surface at a distance of 25cm； 4.To avoid the flow line or sagging，three times spraying are needed. After the first time spray，flatten and fill the
cracks and caves with metal seal-glue.Every interval should be not less than 15 minutes，best noise deaden effect need More than 1.5mm thickness.
5.Before drying，petrol is allowed to clean.
Storage
Optimal Storage: Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C to 28°C (46°F to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
Keep away from the hear and fire.
Note
Swallowed ： Give water (If conscious）. Seek medical advice. DO NOT give milk and oil. DOT NOT give alcohol. Skin: Remove contaminated clothing, including footwear. Wash with water and soap.
Eyes: Wash with running water.
Inhalation: Fresh air , rest, keep warm. If breathing shallow, give oxygen and medical attention. KEEP OUT OF REACH OF CHILDREN.
Visbella® Heavy-duty Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. This coating provides one-coat build-up with no dripping, running or sagging. The undercoating is excellent for automotive undercarriages and for other uses including protection for wheel wells, fenders, quarter.
Features | Benefits |
Rust disappears | Offers lasting and flexible |
Excellent protective primer | With a roar-preventing effect. |
Durable black polymer coating | Applied in various kinds of metal surface |
Directions
1.Clean the base area thoroughly，which should be clean dry and free of dust，oil， grease and wax，etc. 2.Cover the other parts tightly；
3.Spend two minutes to shake the can evenly，open the lid，remover the seal and insert the special designed spray gun onto the mouth，collect the 0.6-0.8M compressed air， finally spray onto the surface at a distance of 25cm； 4.To avoid the flow line or sagging，three times spraying are needed. After the first time spray，flatten and fill the
cracks and caves with metal seal-glue.Every interval should be not less than 15 minutes，best noise deaden effect need More than 1.5mm thickness.
5.Before drying，petrol is allowed to clean.
Storage
Optimal Storage: Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C to 28°C (46°F to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
Keep away from the hear and fire.
Note
Swallowed ： Give water (If conscious）. Seek medical advice. DO NOT give milk and oil. DOT NOT give alcohol. Skin: Remove contaminated clothing, including footwear. Wash with water and soap.
Eyes: Wash with running water.
Inhalation: Fresh air , rest, keep warm. If breathing shallow, give oxygen and medical attention. KEEP OUT OF REACH OF CHILDREN.
