| Quantity: | |
|---|---|
Visbella® Throttle Body & Air Intake Valve Cleaner is a powerful solvent blend that will quickly remove gum, varnish, carbon and other deposits. It can improve engine performance by dissolving deposits that build up and cause rough idling, hard starting, stalling and poor acceleration. It will clean the throttle valve, throttle body, idle air control valves, PCV valves and other parts of the air induction system that have deposit accumulation. The product will not harm oxygen sensors or catalytic converters.
Features | Benefits |
Cleans& Lubricates | Protects throttle valve throttle |
Removes Power Robbing Gum& Varnish | Easy Operation |
Directions
（A）
1. Attach extension tube to button.
2. Start engine. Place cloth to absorb excess product which may drain from the intake manifold.
3. Spray bursts into throttle body while manually working butterfly valve. Spray for approximately 30-60 seconds. 4.Replace intake hose.
5.Remove cloth and dispose of properly. Run engine for 1-2 minutes.
（B）
1. Attach extension tube to button. Do not start engine.
2. Remove air intake hose at the manifold. Place cloth to absorb excess product which may drain from the intake manifold during use.
3. Spray bursts into throat, while manually moving the butterfly valve. Spray for about 10-15 seconds. 4.Replace intake hose Remove cloth and dispose of properly before starting engine.
5.Run engine for 1-2 minutes.
Storage
1. Store in a dry, well-ventilated area below 120°F/49°℃.
2. Do not expose to heat, spark, or open flame.Do not puncture or incinerate can.
Note
FIRE AND EXPLOSION HAZARD: Use only in well-ventilated area away from heat, sparks, or flame. Keep can from contact with electrical current or connections (such as battery terminals) because burn-through and resulting explosion may occur.
EYES: Flush with water for 15 minutes while lifting eyelids. Get prompt medical attention. SKIN: Wash with soap and water. If irritation develops. seek medical attention.
INHALATION: Move to fresh air. If breathing becomes difficult, get prompt medical attention.
INGESTION: Do not induce vomiting. Contact Poison Control Center, Hospital Emergency Room or Physician immediately.
Visbella® Throttle Body & Air Intake Valve Cleaner is a powerful solvent blend that will quickly remove gum, varnish, carbon and other deposits. It can improve engine performance by dissolving deposits that build up and cause rough idling, hard starting, stalling and poor acceleration. It will clean the throttle valve, throttle body, idle air control valves, PCV valves and other parts of the air induction system that have deposit accumulation. The product will not harm oxygen sensors or catalytic converters.
Features | Benefits |
Cleans& Lubricates | Protects throttle valve throttle |
Removes Power Robbing Gum& Varnish | Easy Operation |
Directions
（A）
1. Attach extension tube to button.
2. Start engine. Place cloth to absorb excess product which may drain from the intake manifold.
3. Spray bursts into throttle body while manually working butterfly valve. Spray for approximately 30-60 seconds. 4.Replace intake hose.
5.Remove cloth and dispose of properly. Run engine for 1-2 minutes.
（B）
1. Attach extension tube to button. Do not start engine.
2. Remove air intake hose at the manifold. Place cloth to absorb excess product which may drain from the intake manifold during use.
3. Spray bursts into throat, while manually moving the butterfly valve. Spray for about 10-15 seconds. 4.Replace intake hose Remove cloth and dispose of properly before starting engine.
5.Run engine for 1-2 minutes.
Storage
1. Store in a dry, well-ventilated area below 120°F/49°℃.
2. Do not expose to heat, spark, or open flame.Do not puncture or incinerate can.
Note
FIRE AND EXPLOSION HAZARD: Use only in well-ventilated area away from heat, sparks, or flame. Keep can from contact with electrical current or connections (such as battery terminals) because burn-through and resulting explosion may occur.
EYES: Flush with water for 15 minutes while lifting eyelids. Get prompt medical attention. SKIN: Wash with soap and water. If irritation develops. seek medical attention.
INHALATION: Move to fresh air. If breathing becomes difficult, get prompt medical attention.
INGESTION: Do not induce vomiting. Contact Poison Control Center, Hospital Emergency Room or Physician immediately.
