| Quantity: | |
|---|---|
Visbella® Valve Grinding Compound is an odorless grey paste containing selected abrasive grits dispersed in a waterbase, non-corrosive binder composed of gelling agents, lubricants, preservatives and ethylene glycol. It is a multipurpose compound designed to aid valve grinding operations on automotive, industrial and marine engines. Can be used for lapping and grinding chromium-cobalt, hard-faced seats and discs. Removes burrs, surface defects, gums, carbon deposits and corrosion. Mixes with water to form easy-to-use paste. Combines special grits of various sizes that become finer as the compound is worked. Provides a fine, smooth finish.
Core Features
1.Speeds precision fit
2.Saves labor
3.Reduces repair costs
4.Non corrosive, non toxic, non flammable
1.Apply a liberal coating of Valve Grinding Compound to valve.
2.Grind in the usual manner.
3.Clean valve and seat with a damp cloth.
4.Allow to dry. It is recommended that valves and seats should be cleaned before installation.
Note: If tube has been properly closed, Valve Grinding Compound should not require thinning.
However, if paste is too thick, add a few drops of water.
Visbella® Valve Grinding Compound is an odorless grey paste containing selected abrasive grits dispersed in a waterbase, non-corrosive binder composed of gelling agents, lubricants, preservatives and ethylene glycol. It is a multipurpose compound designed to aid valve grinding operations on automotive, industrial and marine engines. Can be used for lapping and grinding chromium-cobalt, hard-faced seats and discs. Removes burrs, surface defects, gums, carbon deposits and corrosion. Mixes with water to form easy-to-use paste. Combines special grits of various sizes that become finer as the compound is worked. Provides a fine, smooth finish.
Core Features
1.Speeds precision fit
2.Saves labor
3.Reduces repair costs
4.Non corrosive, non toxic, non flammable
1.Apply a liberal coating of Valve Grinding Compound to valve.
2.Grind in the usual manner.
3.Clean valve and seat with a damp cloth.
4.Allow to dry. It is recommended that valves and seats should be cleaned before installation.
Note: If tube has been properly closed, Valve Grinding Compound should not require thinning.
However, if paste is too thick, add a few drops of water.
